|
MOTORCYCLE
& ATV WHEEL CHOCKS |
|
|
|
Mounting Kit Included |
|
PINGEL
REMOVABLE MOUNT
WHEEL CHOCKS
- Also
available for ATVs
- Choose
removable or permanent-mount wheel chocks
- Great-looking
way to secure your motorcycle during transport…eliminates worry
about damage!
Chocks
are made of polished chromed heavy-duty, thick-wall tubular steel
(7/8" diam.). Mounts to pickup bed or trailer floor and safely holds
bike (tie-downs required—not included). Reinforced with chromed
welded-on steel supports on both sides and a cross brace on bottom. 2
welded-on steel tabs on bottom of chock fit into patented stainless steel
mounting plates. Check your tire's width before ordering.
The appearance of the wheel chock including cross brace is a trademark of
Pingel Enterprise, Inc.
NOTE: Pingel has changed the design of the 6-1/2 wheel chock. It is now suitable for use with all sized tires up to 6-1/2’’ wide. This allows the same wheel chock for your dirt bike, sport bike, cruiser, touring bike, custom, or drag bike. This new design features increased rotor clearance for motorcycles that are equipped with large diameter rotors, i.e. new sport bikes. A common misconception about wheel chocks is that the sides of the chock hold the bike in place when it is indeed the front triple radius bend that does the job. With tie downs pulling the bikes front tire forward into the wheel chock, it is physically impossible for the bike to slip.
|
|
Motorcycles |
|
|
|
|
Part
No. |
Description
|
Tire
Width
|
WT lbs |
Price
|
|
WC350 |
Removable
Mount Wheel Chocks
w/Mounting Hardware for all 21" Wheels |
up to
3-1/2" |
7.0 |
$69.95 |
|
WC650 |
Removable
Mount Wheel Chocks
w/Mounting Hardware for
Honda Valkyrie, Yamaha Royal Star &
Tires Sizes 150-160 mm |
5-3/4"
to 6-1/2" |
7.0 |
$74.95 |
|
Removable
Wheel Chock Mounting Hardware |
|
|
|
|
Part
No. |
Description
|
WT lbs |
Price |
|
WC-MD010T
|
Additional
Complete
Wheel Chock Mounting kit |
1 |
$28.95 |
|
Click
Here >> For Tie-Downs |
|
|
|
| |
|
|
|
|
PINGEL
PERMANENT MOUNT
WHEEL CHOCKS
- Also
available for ATVs
- Great-looking
way to secure your motorcycle during transport…eliminates
worry about damage!
Chocks
are made of polished chromed heavy-duty, thick-wall
tubular steel (7/8" diam.). Mounts to pickup
bed or trailer floor and safely holds bike
(tie-downs required—not included). Reinforced with
chromed welded-on steel supports on both sides and a
cross brace on bottom.
|
|
Motorcycles |
|
|
|
|
Part
No. |
Description
|
Tire
Width
|
WT lbs |
Price |
|
WC35H |
Permanent
Mount Wheel Chock
w/Mounting Hardware for all 21" Wheels |
up to
3-1/2" |
7.0 |
$35.70 |
|
WC65H |
Permanent
Mount Wheel Chock
w/Mounting Hardware for
Honda Valkyrie, Yamaha Royal Star &
Tires Sizes 150-160 mm |
5-3/4"
to 6-1/2" |
7.0 |
$35.70 |
|
ATV |
|
|
|
|
Part
No. |
Description
|
Tire
Width
|
WT lbs |
Price |
|
WC1125H |
Permanent
Reinforced Wheel Chocks
w/Mounting Hardware for ATV's |
up to 11-1/4" |
7 |
$71.40 |
|
Click
Here >> For Tie-Downs |
|
|
|
| |
|
|
|
|
PINGEL
WHEEL CHOCKS
FOR CORRUGATED FLOORS
- Also
available for ATVs
- Great-looking
way to secure your motorcycle during
transport…eliminates worry about damage!
Chocks
are made of polished chromed heavy-duty, thick-wall
tubular steel (7/8" diam.). Mounts to pickup
bed or trailer floor and safely holds bike
(tie-downs required—not included). Reinforced with
chromed welded-on steel supports on both sides and a
cross brace on bottom.
|
|
Motorcycles |
|
|
|
|
Part
No. |
Description
|
Tire
Width
|
WT lbs |
Price |
|
WC65TBM |
Permanent
Mount Wheel Chocks
w/Mounting Hardware for
Honda Valkyrie, Yamaha Royal Star &
Tires Sizes 150-160 mm |
5-3/4"
to 6-1/2" |
7.0 |
$119.00 |
|
WC-TBM
|
Extra
Wheel Chock Mounting Plate
Enables you to mount Chock
in Different Locations |
|
1.0 |
$51.00 |
|
Click
Here >> For Tie-Downs |
|
|
|
| |
|
|
|
|
Pingel
Series E-Track Wheel Chock:
Pingel’s
Series E Track Wheel Chock system allows you to
locate your motorcycle anywhere along the track for
the best position. With this system, multiple
motorcycles can now be quickly and easily installed
in your trailer with optimum space utilization.
With Series E Track already in place there is no
further hardware to install. The installation
of the Series E Track Wheel Chock is easy: two clips
and a pull of a strap and your chock is secured.
Installs securely in both recessed and floor mounted
Series E Tracks. Pingel’s E Track Series
Wheel Chocks feature a heavy-duty thick wall steel
construction plated with a lustrous chrome finish,
durable aluminum mounting plate, and quality
fasteners
.
|
|
|
|
|
|
|